Bureau of Indian Standards (BIS) and ISO codes

In addition to "SP 46 : 2003 Engineering drawing practice for schools and colleges" the B.I.S. codes and I.S.O. codes referred are as follows:

IS 8930 : Part 1 : 1995/ISO 10209-1 : 1992 Technical product documentation -vocabulary Part 1 Terms relating to technical drawings: General and types of drawings

IS 8976 : 1978 Guide for preparation and arrangement of sets of drawings and parts lists

IS 9609 : Part 0 : 2001/ISO 3098-0 : 1997 Technical Product Documentation - Lettering - Part 0 : General Requirements

IS 9609 : Part 1 : 2006 /ISO 3098-2 : 2000 Technical Product Documentation - Lettering Part 1 Latin Alphabet, Numerals and Marks

IS 10711 : 2001/ISO 5457 : 1999 Technical Product Documentation - Sizes and Layout of Drawing Sheets

IS 10712 : 1983/ISO 6433 : 1981 Presentation of item references on technical drawings

IS 10713 : 1983/ISO 5455 : 1979 Scales for use in technical drawings

IS 10714 : 1983/ISO 128 : 1982 General principles of presentation on technical drawings

IS 10714 : Part 21 : 2001/ISO 128-21 : 1997 Technical Drawings - General Principles of Presentation - Part 21 : Preparation of Lines by Cad Systems

IS 10714 : Part 20 : 2001 Technical Drawings - General Principles of Presentation - Part 20 Basic Conventions for Lines

IS 10990 : Part 1 : 1991/ISO 6412-1 : 1989 Technical drawings - Simplified representation of pipelines Part 1 General rules and orthogonal representation

IS 10990 : Part 2 : 1992/ISO 6412-2 : 1989 Technical drawings - Simplified representation of pipelines Part 2 Isometric projections

IS 11065 : Part 1 : 1984 Drawing practice for axonometric projections Part 1 Isometric projection

IS 11065 : Part 2 : 1985 - Drawing Practice for Axonometric Projections - Part 2 : Dimetric Projection

IS 11663 : 1986 Conventional representation of common features and materials on technical drawings

IS 11664 : 1986 Folding of drawing prints

IS 11665 : 1985/ISO 7200 : 1984 Technical drawings - Title block

IS 11666 : 1985/ISO 7573 : 1983 Technical drawings - Item lists

IS 11668 : 1985/ISO 6411 : 1982 Technical drawings - Simplified representation of centre holes

IS 11669 : 1986 /ISO 129 : 1985 General Principles of Dimensioning on Technical Drawings

IS 11670 : 1993 Technical Drawings - Abbreviations and Symbols for Use in Technical Drawings

IS 11775 : 1986 Recommendations for modular co-ordination: notations and symbols for modular drawings

IS 15021 : Part 3 : 2001 Technical Drawings - Projection Methods - Part 3 : Axonometric Representations

IS 15021 : Part 1 : 2001 Technical Drawings - Projection Methods - Part 1 : Synopsis

IS 15021 : Part 2 : 2001 Technical Drawings - Projection Methods - Part 2 : Orthographic Representations

IS 15021 : Part 4 : 2001 Technical Drawings - Projection Methods - Part 4 : General Preojection

IS 15023 : Part 2 : 2001 /ISO 5845-2 : 1995 Technical Drawings - Simplified Representation of the Assembly of Parts With Fasteners - Part 2 : Rivets for Aerospace Equipment

IS 15023 : Part 1 : 2001 Technical Drawings - Simplified Representation of the Assembly of Parts with Fasteners - Part 1 : General Principles

IS 15057 : 2001 Computer-Aided Design (CAD) Technique - Use of Computers for the Preparation of Construction for Drawings

IS 15093 : 2002/ISO 9431 : 1990 Construction Drawings - Spaces for Drawing and for Text, and Title Blooks on Drawing Sheets

Note: The readers may come across some more codes referred in the book other than mentioned here.